The efficient with short expansion element

Frame fixing SXR with countersunk head

The fischer frame fixing SXR is a plug made from high-quality nylon. Thanks to its special plug geometry, the SXR can be used in solid and hollow building materials. Due to the low anchorage depth of just 50 mm, the frame fixing can work particularly cost-effectively. The low drill hole depth saves time and reduces bit wear. The SXR is offered in the diameters 6, 8 and 10 mm with a anchor length of 260 mm and with countersunk head screws made from zinc-plated steel, hot-dip galvanised steel and stainless steel. The European Technical Approval offers added safety. The SXR with the countersunk head screw is particularly recommended for fixing wood constructions.

Product variants

Approvals / Test reports

36 Product variant (s)

Drill diameter

Min. drill hole depth for through fixings

Usable length at anchorage depth 30 mm

Usable length at anchorage depth 50 mm

Drive

Anchor length

Legend = Permission Available— = Permission not Available

More results

Viewed 18 of 36 variant (s)

Advantages

The special functioning allows for use in solid and hollow building materials with an anchorage depth of just 50 mm, ensuring an economical fixing.
The ETA assessment covers use in a range of solid and hollow building materials, and guarantees a secure fixing.
The specially developed combination of plugs and screws ensures the very best handling. The plug has a noticeable hold, making installation more convenient.
Extensive range with diameters of 6, 8 and 10 mm, usable lengths up to 210 mm.

Applications

Façade, ceiling and roof substructures made of wood and metal
Windows
Gates and doors
Wardrobes
Kitchen hanging cabinets
Squared timbers
Beams
TV consoles
Wall covering
Metal brackets
Metal supports
Cable ducts
Cable trays

Building materials

Approved for:

Concrete ≥ C12/15
Vertically perforated brick
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Solid sand-lime brick
Aerated concrete
Solid block made from lightweight and normal weight concrete
Solid brick
Thermal insulation blocks

Also suitable for:

Natural stone with dense structure
Solid panel made from gypsum

You can find detailed information on building materials in the registration document.

Approvals

ETA-07/0121
DoP No. 0329

Functionality

The SXR is suitable for push-through installation.
The SXR expands in solid building materials.
In hollow building materials the loads are transferred in the area of the block fillets.
With vertically perforated bricks, only use rotary drilling (no impact drilling).
Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer.

Mounting Strip 1 Picture

1 / 5

ETA Certification Document

pdf, ETA-07/0121

European Technical Assessment for fischer frame fixing SXR/SXRL - Plastic anchor for redundant non-structural systems in concrete and masonry

Created on 20/12/2022

DOP - Declaration of Performance

pdf, DoP No. 0329

Declaration of Performance for fischer frame fixing SXR/SXRL (Plastic anchor for use in concrete and masonry)

Created on 17/01/2023

Load Table

pdf,

Frame fixing SXR - Recommended loads of a single anchor as part of a multiple fixing of non-structural systems. The given loads are valid for wood screws with the specified diameter.

Load Table

pdf,

Frame fixing SXR - Permissible loads of a single anchoras part of a multiple fixing of non-structural systems.

Marketing Documents

pdf,

Frame fixings. The full range for all applications.

ETA-approval	—
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	60 mm
Usable length at anchorage depth 30 mm ( t_fix )	20 mm
Usable length at anchorage depth 50 mm	—
Drive	PZ2
Anchor length ( l )	50 mm
Drive	—
Contents	8 x Frame fixing SXR 6 x 50 , 8 x wood screw with countersunk head 4.5 x 55 mm
Packaging	Blister card
Amount	6 pcs.
GTIN (EAN-Code)	4048962056976

ETA-approval	—
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Usable length at anchorage depth 30 mm ( t_fix )	30 mm
Usable length at anchorage depth 50 mm	—
Drive	PZ2
Anchor length ( l )	60 mm
Drive	—
Contents	—
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4048962055498

ETA-approval	—
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Usable length at anchorage depth 30 mm ( t_fix )	30 mm
Usable length at anchorage depth 50 mm	—
Drive	PZ2
Anchor length ( l )	60 mm
Drive	—
Contents	8 x Frame fixing SXR 6 x 60 , 8 x wood screw with countersunk head 4.5 x 65 mm
Packaging	Blister card
Amount	8 pcs.
GTIN (EAN-Code)	4006209946404

ETA-approval	—
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Usable length at anchorage depth 30 mm	—
Usable length at anchorage depth 50 mm ( t_fix )	10 mm
Drive	PZ3
Anchor length ( l )	60 mm
Drive	—
Contents	6 x Frame fixing SXR 8 x 60 , 6 x wood screw with countersunk head 5.5 x 65 mm
Packaging	Blister card
Amount	6 pcs.
GTIN (EAN-Code)	4006209946411

ETA-approval	—
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	90 mm
Usable length at anchorage depth 30 mm	—
Usable length at anchorage depth 50 mm ( t_fix )	30 mm
Drive	PZ3
Anchor length ( l )	80 mm
Drive	—
Contents	5 x Frame fixing SXR 8 x 80, 5 x wood screw with countersunk head 5.5 x 85 mm
Packaging	Blister card
Amount	5 pcs.
GTIN (EAN-Code)	4006209946428

Frame fixing SXR with countersunk head

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download