The injection anchor sleeve for particularly sparing mortar usage in perforated brick masonry

Injections anchor sleeve FIS H K

The fischer injection anchor sleeve FIS H K is the system component for the professional, mortar-saving installation of the threaded rod FIS A or internal threaded anchor FIS E in perforated brick masonry. The fischer injection mortars FIS V, FIS VW HIGH SPEED, FIS VS LOW SPEED, FIS VL, FIS Green, FIS P Plus, and FIS P can be used with it. The optimised grating structure reduces the use of injection mortar. When the threaded rod and internal threaded anchor are installed, the mortar is pressed through the grating structure and creates a form fit with the perforated brick. This directs the load into the building material. Setting takes place in a pre-positioned installation. You can use the injection anchor sleeve to bridge non-load-bearing layers. The approvals of the various injection mortars must be observed.

Product variants

Approvals / Test reports

18 Product variant (s)

Drill diameter

Min. drill hole depth

Match

Effect. anchorage depth

Fill quantity per sleeve

Contents

Legend = Permission Available— = Permission not Available

Viewed 18 of 18 variant (s)

Advantages

The grating structure of the FIS H K anchor sleeve is adapted for the injection mortars FIS V Plus,FIS V,FIS VL, FIS Green and FIS P Plus, and ensures sparing mortar use with the best interlock.
The centring blades perfectly align the anchor in the anchor sleeve, and allow for use with various threaded rod diameters.
The barbed hooks secure the anchor sleeve in the drill hole and allow for a trouble-free overhead installation.
The geometry of the anchor sleeves allows for the bridging of non-bearing layers for a simple and convenient installation.

Applications

Anchorings in perforated brick masonry with injection mortars FIS V, FIS VL, FIS P Plus, FIS P, and FIS Green

Building materials

Approved for:

Vertically perforated brick
Hollow blocks made from lightweight concrete
Hollow blocks made from concrete
Perforated sand-lime brick
Solid sand-lime brick
Solid brick

Also suitable for:

Hollow pumice slabs
Slabs made of hollow brick and other perforated brick
Solid pumice and other solid building materials

You can find detailed information on building materials in the registration document.

Approvals

ETA-15/0263
ETA-10/0383
ETA-14/0471
ETA-20/0729
DoP No. 0195
DoP No. 0189
DoP No. 0273
DoP No. 0354

Functionality

The system can be used with any of the following injection mortars:FIS V Plus, FIS VW Plus High Speed, FIS VS Plus Low Speed, FIS V, FIS VL, FIS Green or FIS P Plus. FIS P can be used but does not have approvals.
The system is suitable for pre-positioned installation when combined with injection anchor sleeves and threaded rods FIS A or internal threaded anchors FIS E.
The anchor sleeve is placed in the drill hole, and filled with injection mortar from the anchor sleeve base.
Turning in the anchor causes the mortar to be pushed through the anchor sleeve's grating structure, so that it fits the base material perfectly. The load is borne by the interlock.

ETA Certification Document

pdf, ETA-15/0263

European Technical Assessment fischer Injection system FIS VL for use in masonry - Injection system for use in masonry

Created on 07/07/2020

ETA Certification Document

pdf, ETA-10/0383

European Technical Assessment for fischer Injection system FIS V for use in masonry - Metal injection anchors for use in masonry

Created on 07/07/2020

ETA Certification Document

pdf, ETA-14/0471

European Technical Assessment fischer Injection system FIS GREEN for masonry - Injection system for use in masonry

Created on 03/02/2015

ETA Certification Document

pdf, ETA-20/0729

European Technical Assessment for injection System fischer FIS V Plus for masonry - Metal injection anchors for use in masonry

Created on 31/10/2023

DOP - Declaration of Performance

pdf, DoP No. 0195

Declaration of Performance for fischer injection mortar FIS VL (Metal injection anchor for use in masonry)

Created on 04/08/2020

DOP - Declaration of Performance

pdf, DoP No. 0189

Declaration of Performance for fischer injection system FIS V (Metal injection anchors for use in masonry)

Created on 21/07/2019

DOP - Declaration of Performance

pdf, DoP No. 0273

Declaration of Performance for fischer Injection system FIS GREEN (Metal injection anchors for use in masonry)

Created on 20/01/2021

DOP - Declaration of Performance

pdf, DoP No. 0354

Declaration of Performance for fischer injection system FIS V Plus (Metal injection anchors for use in masonry)

Created on 14/11/2023

Load Table

pdf,

Injection system FIS V, FIS VS and FIS VW with threaded rod FIS A and anchor sleeve FIS H..K - Highest permissible loads for a single anchor in perforated brick masonry for pre-positioned installation.

Installation Instructions

pdf,

Through-Wall Anchor Sleeve

Masonry drill bit Pointer M
3 variants

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth ( h₁ )	60 mm
Match	FIS A M6-M8
Effect. anchorage depth ( h_ef )	50 mm
Fill quantity per sleeve	5 scale units
Contents	—
Amount	50 pcs.
GTIN (EAN-Code)	8001132419007

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth ( h₁ )	95 mm
Match	FIS A M6-M8
Effect. anchorage depth ( h_ef )	85 mm
Fill quantity per sleeve	10 scale units
Contents	—
Amount	50 pcs.
GTIN (EAN-Code)	8001132419014

ETA-approval
Drill diameter ( d₀ )	12 mm
Min. drill hole depth ( h₁ )	95 mm
Match	—
Effect. anchorage depth ( h_ef )	85 mm
Fill quantity per sleeve	10 scale units
Contents	4 x Injection anchor sleeve FIS H 12 x 85 K
Amount	4 pcs.
GTIN (EAN-Code)	4048962059335

ETA-approval	—
Drill diameter ( d₀ )	16 mm
Min. drill hole depth ( h₁ )	95 mm
Match	FIS A M8-M10
Effect. anchorage depth ( h_ef )	85 mm
Fill quantity per sleeve	12 scale units
Contents	—
Amount	50 pcs.
GTIN (EAN-Code)	8001132419021

ETA-approval
Drill diameter ( d₀ )	16 mm
Min. drill hole depth ( h₁ )	95 mm
Match	—
Effect. anchorage depth ( h_ef )	85 mm
Fill quantity per sleeve	—
Contents	4 x Injection anchor sleeve FIS H 16 x 85 K
Amount	4 pcs.
GTIN (EAN-Code)	4048962059342

Injections anchor sleeve FIS H K

Product variants

The advantages / Product description

Application and approval

Assembly instruction

Documents for download

ETA-approval
Drill diameter ( d₀ )	20 mm
Min. drill hole depth ( h₁ )	95 mm
Match	FIS A M12-M16, FIS E M10-M12
Effect. anchorage depth ( h_ef )	85 mm
Fill quantity per sleeve	15 scale units
Contents	—
Amount	20 pcs.
GTIN (EAN-Code)	8001132419045

ETA-approval	—
Drill diameter ( d₀ )	18 mm
Min. drill hole depth ( h₁ )	140 mm
Match	M10 - M12
Effect. anchorage depth ( h_ef )	130 mm
Fill quantity per sleeve	35 scale units
Contents	—
Amount	10 pcs.
GTIN (EAN-Code)	4006209457078

ETA-approval
Drill diameter ( d₀ )	22 mm
Min. drill hole depth ( h₁ )	140 mm
Match	M16
Effect. anchorage depth ( h_ef )	130 mm
Fill quantity per sleeve	45 scale units
Contents	—
Amount	10 pcs.
GTIN (EAN-Code)	4006209457085