The economical solution in cracked concrete

Highbond anchor FHB II-A L Inject

The Highbond anchor rod FHB II-AL Inject R is a system component of the fischer Highbond system FHB II Inject. The bonded anchor is ideal for standard fastenings in cracked concrete. With the FHB II AL Inject R for example guard rails and steel brackets are fixed outdoors. The conical anchor is set with the Highbond special mortar FIS HB.

Produktvarianter

Godkjenninger/testrapporter

8 produktvariant(er)

Drill diameter

Drill hole depth

Anchorage depth

Max. fixture thickness

Thread

Width across nut

Tegnforklaring = Tillatelse tilgjengelig— = Tillatelse ikke tilgjengelig

Viste 8 av 8 variant(er)

Advantages

The Highbond system FHB II Inject achieves high load values in cracked concrete.
The combination of injection mortar FIS HB and anchor rod FHB II-AL Inject R (long version) is ideally suited for serial installation outdoors.
The low drill hole depth minimizes the drilling effort, which saves time and ensures economical installation.
When using hollow drills with extraction, no drill hole cleaning is required.

Functionality

The FHB II-AL Inject is a bonded anchor with torque-controlled expansion for pre-positioned and push-trough installation.
For FHB II-AL Inject, the annular gap must be filled with Highbond special mortar FIS HB in case of push-through installation.
The anchor rod is set with the Highbond special motor FIS HB and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled in the motar shell, which expands against the drill hole wall.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 9

ETA Certification Document

pdf, ETA-16/0637

European Technical Assessment for fischer Highbond-Anchor FHB II Inject - Torque controlled bonded anchor for use in concrete

Opprettet 14/12/2017

DOP - Declaration of Performance

pdf, DoP No. 0281

Declaration of Performance for fischer Highbond-Anchor FHB II Inject (Bonded expansion fastener for use in concrete)

Opprettet 19/01/2021

Test report (fire protection)

pdf, GS 3.2/16-352-1

fischer Highbond anchors FHB II and FHB 11 lnject

Gyldig fra 07/02/2017
til 06/02/2027

Test report (fire protection)

pdf, (2103/12/12) - CM

lnjection systems FHB / FHB dyn / FDA

Gyldig fra 15/07/2021
til 15/07/2026

Filling Quantities

pdf,

Filling quantities für highbond-Anchor FHB II-A L Inject

Load Table

pdf,

Highbond-Anchor FHB II Inject - Permissible loads of a single anchor in normal concrete of strength class C20/25.

ETA-approval
Drill diameter ( d₀ )	12 mm
Drill hole depth ( h₀ )	101 mm
Anchorage depth ( h_ef )	95 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962272963

ETA-approval
Drill diameter ( d₀ )	12 mm
Drill hole depth ( h₀ )	101 mm
Anchorage depth ( h_ef )	95 mm
Max. fixture thickness ( t _fix )	20 mm
Thread ( M )	M10
Width across nut	17 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962272970

ETA-approval
Drill diameter ( d₀ )	14 mm
Drill hole depth ( h₀ )	106 mm
Anchorage depth ( h_ef )	100 mm
Max. fixture thickness ( t _fix )	25 mm
Thread ( M )	M12
Width across nut	19 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962272987

ETA-approval
Drill diameter ( d₀ )	14 mm
Drill hole depth ( h₀ )	126 mm
Anchorage depth ( h_ef )	120 mm
Max. fixture thickness ( t _fix )	25 mm
Thread ( M )	M12
Width across nut	19 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962272994

ETA-approval
Drill diameter ( d₀ )	18 mm
Drill hole depth ( h₀ )	131 mm
Anchorage depth ( h_ef )	125 mm
Max. fixture thickness ( t _fix )	30 mm
Thread ( M )	M16
Width across nut	24 mm
Amount	10 pcs.
GTIN (EAN-Code)	4048962273021

Highbond anchor FHB II-A L Inject

Produktvarianter

Fordelene / Produktbeskrivelse

Søknad og godkjenning

Monteringsanvisning

Dokumenter for nedlasting