fischer Cantilever arm FCA 21/2.0 - 450

Top Features

Graduated range of lengths.
Different hole geometry.
High installation flexibility.

FUS profiles with welded base plate for direct mounting on the base material.

Advantages

The graduated range of lengths allows for an ideal adaptation to the application.
The arm's solid base plate offers a secure hold for load-bearing construction.
The base plate's long slots, which are at 90° to one another, allow the arm to be easily aligned.
The stamped serration in the channel gives the sliding nuts a secure hold for high shear loads, e.g. for vertical installation.

The cantilever arm FCA is a second base element of the channel system FUS, and is suitable for the installation of pipeline routes along walls. The cantilever arm is directly secured to the substrate by means of the slots in the base plate, which are at 90° to each other. fischer offers standard lengths from 200 to 1000 mm, which means that they do not need to be cut to size. This saves time and money.

Properties

Material: steel S235JR (material no. 1.0037) acc. to DIN EN 10025
Zinc plating: electro zinc-plated

Profile	21 / 2.0
Length ( L )	450 mm
Max. recommended static load load case 1 ( F_rec )	0,65 kN
Max. recommended static load load case 2 ( F_rec )	0,21 kN
Max. recommended static load load case 3 ( F_rec )	0,65 kN
Amount	1 pcs.
GTIN (EAN-Code)	4048962253757

fischer Cantilever arm FCA 21/2.0 - 450

Las ventajas / descripción del producto

Solicitud y aprobación

Instrucciones de montaje

Datos técnicos

Documentos para descargar