Flush installation of panels with minor tolerances.
For all natural stones class I-IV.
Stress-free fixing enables high loads and use of thin panels.
Sleeve made of carbon fibre reinforced polyamid.
Oheistarvikkeet
Tuotenumero 803748
SGA-M8
Tuotenumero 535985
FZPB 13/21 CNC
Tuotenumero 804063
CNC adapter
Tuotenumero 802338
DPL 13
Tuotenumero 061502
BSN 100 VP
Tuotenumero 061500
SBN 502
Tuotenumero 044638
FZE 12 plus
Tuotenumero 802522
SGB/230V
Tuotenumero 802507
MST-D
Tuotenumero 521670
Lock nut M8 A4
Tuotenumero 521668
Nut M8 A4
Tuotenumero 060711
FZPB 13
Tuotenumero 802506
STU 10 - 30
Tuotenumero 060710
FZPB 11
Tuotenumero 802337
HVL 13
Edut / Tuotekuvaus
The universal undercut anchor made of fibreglass-reinforced plastic for natural stone.
Advantages
The flush-mounting technology of the undercut anchor allows an easy, economical handling of reveals.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
The concealed fixing solution for heavy, natural stone façade panels using the carbon fibre-reinforced undercut anchors with flush installation. These are fixed with a consistent drill hole depth aligned to the back of the panel. This type of fixing technology is used, for instance, with calibrated façade panels or for reveal angle installation.
Hakemus ja hyväksyminen
Applications
Exterior façades
Interior façades
Façade reveals
Natural stone heating systems
Building materials
Natural stone (>20mm)
Artificial concrete panels
Löydät yksityiskohtaiset tiedot rakennusmateriaaleista rekisteröintiasiakirjasta.
Hyväksynnät
ETA-11/0145
ETA-22/0400
DoP No. 0261
DoP No. 0307
DoP No. 0322
Kokoamisohje
Functionality
The drill hole is drilled with an absolute anchoring depth.
Flush installation of the anchor.
Wet diamond drilling: first cylindrical, then conical - to create the undercut. #Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools
European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469
