Flush installation of panels with minor tolerances.
For all natural stones class I-IV.
Stress-free fixing enables high loads and use of thin panels.
Sleeve made of carbon fibre reinforced polyamid.
Tillbehör
Art.-nr 535985
FZPB 13/21 CNC
Art.-nr 044638
FZE 12 plus
Art.-nr 061502
BSN 100 VP
Art.-nr 802507
MST-D
Art.-nr 802337
HVL 13
Art.-nr 802338
DPL 13
Art.-nr 802506
STU 10 - 30
Art.-nr 060710
FZPB 11
Art.-nr 521668
Nut M8 A4
Art.-nr 061500
SBN 502
Art.-nr 521670
Lock nut M8 A4
Art.-nr 803748
SGA-M8
Art.-nr 804063
CNC adapter
Art.-nr 060711
FZPB 13
Art.-nr 802522
SGB/230V
Fördelarna/produktbeskrivning
The universal undercut anchor made of fibreglass-reinforced plastic for natural stone.
Advantages
The flush-mounting technology of the undercut anchor allows an easy, economical handling of reveals.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
The concealed fixing solution for heavy, natural stone façade panels using the carbon fibre-reinforced undercut anchors with flush installation. These are fixed with a consistent drill hole depth aligned to the back of the panel. This type of fixing technology is used, for instance, with calibrated façade panels or for reveal angle installation.
Ansökan och godkännande
Applications
Exterior façades
Interior façades
Façade reveals
Natural stone heating systems
Building materials
Natural stone (>20mm)
Artificial concrete panels
Detaljerad information om byggmaterial finns i registreringsdokumentet.
Godkännanden
ETA-11/0145
ETA-22/0400
DoP No. 0261
DoP No. 0307
DoP No. 0322
Monteringsinstruktion
Functionality
The drill hole is drilled with an absolute anchoring depth.
Flush installation of the anchor.
Wet diamond drilling: first cylindrical, then conical - to create the undercut. #Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools
European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469
