The undercut anchor for thin ceramic façade panels

Zykon-Panel anchor FZP II T D40

The undercut anchor for a concealed fixing of thin façade panels out of ceramics or fine stoneware. Use in conjunction with clasp systems or with other attachments.

Product Variant

Approvals / Test reports

5 product variants

Min. panel thickness

Total length

Thread

Cylindrical diameter

Undercutdiameter

Amount

Legend = Permission Available— = Permission not Available

Viewed 5 of 5 variant (s)

Advantages

The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.

Functionality

wet diamond drilling in ceramic
The drill hole is drilled with an absolute anchoring depth
Flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools
Stress-free and geometrical inter-locking fixing

Mounting Strip 1 Picture

1 / 4

ETA Certification Document

pdf, ETA-23/0756

European Technical Assessment for fischer-Zykon panel anchor FZP II T

Created on 08/12/2023

ETA Certification Document

pdf, ETA-11/0465

European Technical Assessment for fischer-Zykon-panel anchor FZP II T for "Royal Mosa stoneware" - Anchor for the rear fixing of facade panels made of ceramic plates "Royal Mosa stoneware" according to EN 14411:2016

Created on 14/12/2016

ETA Certification Document

pdf, ETA-23/0035

European Technical Assessment for fischer ZYKON FZP II T D40 PA for fixing Atlas Concorde facade panels - Fastener of external wall claddings. Special anchor for the rear fixing of Atlas Concorde ceramic tile facade panels

Created on 24/01/2023

DOP - Declaration of Performance

pdf, DoP No. 0359

Declaration of Performance for fischer-Zykon-panel anchor FZP II T

Created on 12/04/2024

DOP - Declaration of Performance

pdf, DoP No. 0364

Declaration of Performance for fischer ZYKON FZP II T D40 PA panel anchor (for Atlas Concorde ceramic tile facade panels)

Created on 03/06/2024

DOP - Declaration of Performance

pdf, DoP No. 0262

Declaration of Performance for fischer Zykon-panel anchor FZP II T (for Royal Mosa)

Created on 11/01/2021

ETA-approval
Min. panel thickness	8 mm
Total length ( l )	7,5 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Amount	250 pcs.
GTIN (EAN-Code)	4048962362077

ETA-approval
Min. panel thickness	8 mm
Total length ( l )	7,5 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Amount	250 pcs.
GTIN (EAN-Code)	4048962362084

ETA-approval
Min. panel thickness	10 mm
Total length ( l )	8,5 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Amount	250 pcs.
GTIN (EAN-Code)	4048962217735

ETA-approval
Min. panel thickness	12 mm
Total length ( l )	10,5 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Amount	250 pcs.
GTIN (EAN-Code)	4048962217742

ETA-approval
Min. panel thickness	13 mm
Total length ( l )	11,5 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Amount	250 pcs.
GTIN (EAN-Code)	4048962217759

Zykon-Panel anchor FZP II T D40

Product Variant

Your advantages / Product description

Application and approval

Assembly instruction

Documents for Downloading