Name: fischer ATK601 Set E-14/260-T33/80/3 A4
Brand: fischer

Fixed/sliding point bracket set ATK 601 for push-through installation as rod-system.

Advantages

Enables retrofitting of ventilated rainscreen façades.
By means of the push-through and stand-off installation, the wall holder can also be used in already insulated substrates.
Applicable for horizontal and vertical systems.
The passive house certification guarantees sustainable and energy-efficient fixing.
Different load levels are applicable through multiple anchorage depths.

The ATK 601 wall holder set consists of an SXRL frame fixing, which absorbs the shear, tensile and compressive forces, as well as an add-on part and a T-piece. Depending on the orientation of the T-piece, a vertical or horizontal aluminum subframe system can be mounted on the wall holder.

Properties

Anchor: Polyamid and stainless steel or zinc-plated steel
Attachment parts: Aluminum (e.g. EN AW 6063) and stainless steel

Applications

As a wall holder set for renovating existing façades
Consisting of a frame fixing anchor, as well as an attachment part and a T-piece
For load transfer into the building substrate of subframe systems in ventilated rainscreen façades

Building materials

Vertically perforated brick
Aerated concrete
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Solid block made from lightweight and normal weight concrete
Solid brick
Solid sand-lime brick
Concrete ≥ C12/15

DoP: BWM-LE-005
DoP: BWM-LE-006
DoP: BWM-LE-007
DoP: BWM-LE-008

DOP - Declaration of Performance

pdf, DoP: BWM-LE-005

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)

DOP - Declaration of Performance

pdf, DoP: BWM-LE-006

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)

DOP - Declaration of Performance

pdf, DoP: BWM-LE-007

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)

DOP - Declaration of Performance

pdf, DoP: BWM-LE-008

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps)

Length( L )	33 mm
Height( H )	60 mm
Dimensions	1 x 14x20 mm
Hole-ø( D )	5,1 mm
Slot( l x s )	5,5 x 20 mm
Length( L₂ )	250 / 230 mm
System	ATK 100
Contents	50 x SXRL 14 T R, 50 x base plate, 50 x T-console, 100 x rivet
Amount	1 pcs.
GTIN (EAN-Code)	4048962420074