Art.-No. 539462

GTIN (EAN-Code): 4048962269734

fischer injection mortar FIS VL 300 T in bucket

Top Features

High flexibility due to co-ordinated system components.
Approved for concrete and masonry.
Expansion-free fixing for small spacings and edge distances.

The solid injection mortar for standard applications in cracked concrete and masonry

Advantages

The FIS VL is approved for use in cracked concrete and masonry, and achieves a high load-bearing capacity in these conditions.
The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility.

The fischer injection mortar FIS VL is a vinyl ester hybrid mortar with approval for fixing standard applications in cracked concrete and masonry. The FIS VL is processed with the approved system components fischer threaded rod FIS A and fischer internal-threaded anchor RG M I indoors and outside. The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility.

Applications

Steelwork constructions
Timber constructions
Guard rails
Façades
Staircases
Steel brackets
Machines
Masts
Awnings
Canopies
Gates
Consoles
Pipelines
Gratings
Satellite antennas

Building materials

Approved for anchorings in:

Concrete C20/25 to C50/60, cracked
Hollow blocks made from lightweight concrete
Vertically perforated brick
Perforated sand-lime brick
Solid sand-lime brick
Solid brick
Rebar connections
Aerated concrete

Also suitable for:

Concrete C12/15
Hollow blocks made from concrete

You can find detailed information on building materials in the registration document.

Approvals

ETA-15/0263
ETA-15/0539
ETA-10/0352
DoP No. 0195
DoP No. 0342
GS 3.2/18-159-1-r1
21909_2 – abridged version

Functionality

The FIS VL is a 2-component injection mortar based on vinyl ester.
Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
The mortar is extruded bubble free from the drill hole base.
The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
The injection mortar FIS VL 300 T can be applied without a special tool using a standard dispenser.
Partially used cartridges can be reused by changing the static mixer.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 9

Mounting Strip 3 Picture

1 / 7

Mounting Strip 4 Picture

1 / 5

Mounting Strip 5 Picture

1 / 7

Mounting Strip 6 Picture

1 / 7

pdf, ETA-15/0263

European Technical Assessment fischer Injection system FIS VL for use in masonry - Injection system for use in masonry

Created on 07/07/2020

pdf, ETA-15/0539

European Technical Assessment for Rebar connection with fischer FIS VL - Post-installed rebar connection with injection mortar fischer FIS VL

Created on 27/08/2015

pdf, ETA-10/0352

European Technical Assessment for Injection System fischer FIS VL for use in concrete

Created on 26/07/2023

pdf, DoP No. 0195

Declaration of Performance for fischer injection mortar FIS VL (Metal injection anchor for use in masonry)

Created on 04/08/2020

pdf, DoP No. 0342

Declaration of Performance for fischer injection mortar FIS VL (Bonded fastener for use in concrete)

Created on 15/08/2023

pdf, GS 3.2/18-159-1-r1

fischer FIS VL injection system

Created on 04/07/2018

pdf, 21909_2 – abridged version

Fire resistance of fischer injection system FIS VL in masonry

Created on 15/03/2019

Safety data sheet for 539462 FIS VL 300 T in bucket

Injection mortar FIS VL with Threaded rod FIS A - Permissible loads of a single anchor in cracked and non-cracked normal concrete / Injection mortar FIS VL with Internal threaded anchor RG M I - Permissible loads of a single anchor in non-cracked normal concrete / Injection system FIS VL with threaded rod FIS A - Highest permissible loads for a single anchor in solid brick masonry (without injection anchor sleeve) for pre-positioned or push-through installation. / Injection system FIS VL with threaded rod FIS A and anchor sleeve FIS H..K - Highest permissible loads for a single anchor in solid brick and perforated brick masonry (with injection anchor sleeve) for pre-positioned installation. / Injection system FIS VL with threaded rod FIS A - Highest permissible loads for a single anchor in aerated concrete.

Curing times for injection mortar FIS VL / FIS VL HIGH SPEED

ETA-approval
Language on label	EN, ES, PT
Scale unit	150
Contents	20 x Cartridge 300 ml, 40 x static mixer FIS MR Plus
Packaging	Bucket
Amount	20 pcs.
GTIN (EAN-Code)	4048962269734

fischer injection mortar FIS VL 300 T in bucket

The advantages / Product description

Application and approval

Assembly instruction

Technical data

Documents for download